Starlink Gen3 Router (Unboxing, Setup, and Review)

Want to purchase Starlink Gen3 Router but don’t know anything about it? Fear not! SpaceX’s Starlink is a satellite internet system that covers more than 70 countries with plans for global mobile broadband. Thousands of tiny satellite in low Earth orbit communicate with transceivers on the ground. They have become one of the giants in the internet industry with more than 2 million subscribers. There were concerns that it would cause problems with orbital congestion and astronomy but SpaceX is taking steps to deal with these concerns by lowering satellite brightness and implementing mechanisms to avoid collision.

Starlink Gen3 Router
Source: DeviceReport

Satellite Technology

They have a thousand small satellite in low Earth orbit to communicate with Earth. They each weigh about 573 pounds each and circle the planet at around 300 miles above the surface.

Network Design

To ensure tight network coverage, SpaceX has deployed 42,000 tablet-sized satellites. using LEO satellites allows for faster internet speeds and minimal service disruptions compared to traditional satellite internet services.

Advanced Communication

Starlink’s newest satellite technology has a feature of laser communication for signals to be transmitted between the satellites. This feature will reduce reliance on ground stations. SpaceX guarantees to ensure worldwide coverage with minimal service disruption by launching 40,000 satellites.

Performance and Pricing

Starlink offers up to 150mbps speed of internet which they plan to increase in the near future. In most locations, Starlink is has latency values as low as 20 milliseconds.


Starlink offers three internet packages. Residential at $110/mon., Business at $500/mon., and RV at $135/mon. A one-time hardware fee of $599 to $2,500 is also applicable which depends upon the package.


Starlink offers their service to 36 countries with restricted coverage zones with plans to expand. Users to Starlink can see if their location is available for service and, if not, can sign up for a waitlist. It can endure high temperatures, heavy rain, high winds, and frigid temperatures. A phased array antenna aids in keeping performance intact in weather events such as rain, snow, and fog.

Unboxing Gen3 Router

Starlink Gen3 Router
Source: Starlinkhardware

Starlink Gen3 Router (UTR-231) has a full makeover with improved technology, new design, and more features than previous versions. Gen3 Routers are available as a replacement for Gen1 and Gen2 routers. It costs $200.

Gen3 Router Kit

Designed to work with Standard Starlink Gen1 kits, the Gen 3 Router is a WiFi network adapter. It provides internet access for your devices and is compatible with the Standard Starlink Gen1 dish. Here are the parts that make up the Gen 3 Router Kit:

  • Gen 3 Router
  • Starlink Plug
  • RJ45 Cover
  • Gen 3 Router Ethernet Cable (1.5m / 4.92ft)
  • The power cable is 1.5 meters (4.92 feet) long.
  • Power Supply
  • Extra RJ45 ports allow users to connect devices from other manufacturers to the Gen 3 Router.

Finally, Ethernet ports have been added. Customer complaints about the Gen 2 router’s absence of LAN Ethernet connections were taken into consideration by Starlink. To make connecting your devices a breeze, the Gen 3 router comes with two Ethernet connections.
On top of that, they adorned the router’s front with an LED status indication. The Gen 2 routers have an inconvenient LED power indicator on the underside. The state of the Starlink system can be shown by the LED on the Gen 3 router, which can change colors, become solid, or flash.

Starlink Gen3 Router is compatible with all versions of the dish that came before it. Thus, you will have the option to upgrade if you so desire, regardless of whether you possess the present rectangular dish or the original round dish. You can use Gen 2 mesh nodes with Gen 3 routers in a Starlink mesh network.

Dimensions2.4” x 11.8” x 4.7” (55 x 300 x 120 mm)
Weight2.2 lbs (1 kg)
Wi-Fi StandardWi-Fi 6 (802.11 a/b/g/n/ac/ax)
Device LimitUp to 235 devices
RadioTri-Band 4 x 4 MU-MIMO
Input PortsStarlink dish, Power adapter
Output Ports2 x LAN Ethernet ports
Operating Temp.-22°F to 122°F (-30°C to 50°C)
IP RatingIP56 (Water Resistant)
NoteDesigned for indoor use only

How to Use Gen3 Router?

  • The Gen 3 Router cannot be set up until the Starlink dish is installed and linked to the internet.
  • Take the Starlink Gen3 Router Kit out of its packaging.
  • Join the Gen3 Router’s power cord and power supply to an electrical socket.
  • Join the Gen3 Router’s port 1 with the Gen 3 Power Supply’s white port using the Ethernet cable that came with the Gen 3 Router.
  • To join the STARLINK network, go to your device’s WiFi settings.
  • You are now linked. The Gen 3 Router’s light should be completely white. The Starlink app allows you to do a lot more than just check your connection and adjust certain settings.

The Additional RJ45 Ports for Use

  • Find the Gen 3 Router and take off the RJ45 cap.
  • The Gen 3 Router has two Ethernet ports; use the one you have.
  • Join your third-party hardware to the opposite end of the cord.

Fixing issues: Internet Not Working?

  • To see whether there are any warnings, outages, or obstacles, use the Starlink app.
  • Look for these signs on the WiFi router light:
    Flashing White Light: This indicates “Trying to Connect”. If the router is unable to connect to the internet in 20 mins, it will turn red.
    White Light: This indicates that the router is connected to the internet but will turn off after an hour.
    No Light: There is no power to the router.
    Red Light: This indicates that it is not connected to the internet and is in bypass mode. It will turn off after an hour.
    Violet Light: To exit bypass mode, factory reset is required.
  • Verify that all cables and hardware are firmly connected and undamaged.
  • Simply disconnecting and re-plugging the router will reset its power settings.
  • To return the router to its factory settings, use a paper clip to press the reset button.
  • Get in touch with Starlink’s customer service via the app or’s Support area if these solutions don’t work.
  • Prior to configuring your Starlink Gen3 Router, ensure that your Starlink dish is installed and linked to the internet.
  • Open the box of your Gen3 Router Setup!
Starlink Gen3 Router
Source: DeviceReport
  • Take your Gen 1 router off of its power supply and put it away.
Starlink Gen3 Router
Source: DeviceReport
  • Use the power cord and power supply to connect the Gen 3 Router to an electrical outlet.
Starlink Gen3 Router
Source: DeviceReport
  • Join the white port on the Gen 1 Power Supply to the first port on the Gen 3 Router using the Ethernet cable that came with the router.
Starlink Gen3 Router
Source: DeviceReport
  • Within your device’s WiFi settings, locate the STARLINK network and establish a connection to it.
  • The two of you are now linked. Keep the Gen 3 Router’s light on a solid white, and adjust more settings and verify your connection with the Starlink app.
  • Pull off the RJ45 cover.
  • Use either port 1 or 2 to connect your personal Ethernet wire. At the opposite end of the cord, plug in your third-party devices.

Identical to its predecessors, the Starlink Gen 3 router is white and features an orbital transfer ellipse pattern.  its understated design makes it blend in effortlessly with any setting.
In the design of the Gen 3, functionality is given first priority. To make it more user-friendly, the ports have been moved to the back, and the LED status indication has been moved to the front. If you want to keep it out of sight, the router’s understated design is perfect. Those who care more about performance and utility than about how something looks will find the Gen 3 to be an ideal device.

RouterWifi Speed (3Ft)Wifi Speed (50 ft)
Gen 1436 mbps47 mbps
Gen 2670 mbps47 mbps
Gen 3864 mbps203 mbps

Regardless of the sort of Starlink dish you have, setting up the Gen 3 router is usually rather easy. Because the router also serves as a power source, integrating it with the Gen 2 Standard gear is a bit of a hassal. In this case, a workaround similar to utilizing a third-party router with Starlink is required in order to use the Gen 3 router.

Gen1 to Gen 3

From Gen 1 to Gen 3 is an attractive upgrade which is available to owners of the original circular dish (Gen 1). It effortlessly takes the place of the old router, bringing the system up to speed with newer gear by providing access to the newest Starlink technology.

Gen 2 to Gen 3

This update might not be the best choice for Gen 2 Standard dish owners, especially those who have more than one Gen 2 mesh router. Although the Gen 3 router does significantly better in terms of performance, integrating it is more of a stopgap measure. Upgrading all mesh nodes to Gen 3 unlocks the tri-band radio’s mesh-enhancing features. Those who don’t already have mesh devices may also benefit from aftermarket mesh systems, which provide the same functionality for a lower price.

With that said, the Gen 3 router is definitely an improvement over the High Performance Gen 2 gear for those who have used it. It provides the most recent Wi-Fi 6 technology, which guarantees optimal performance and connection, and so unlocks the full potential of the advanced dish and service package.


For customers with older Starlink systems, the $200 Starlink Gen 3 router offers a tempting upgrade option. Its integration of cutting-edge technology, like Wi-Fi 6 and a tri-band radio, guarantees significant enhancements in performance, range, and speed. Starlink is further establishing itself as a frontrunner in the satellite internet market as it prepares to launch the Gen 3 router and next-generation dish. Starlink solves the problem of unreliable internet access by providing consumers with fast connections with low latency, thus closing the digital divide.

People also read about The Best Asian Restaurant In Ocean City 2024 (Nepalese, Indian, Chinese)